Calculation of tensile strength of irregular springs

The tensile strength refers to the load change per unit of deformation, usually expressed in pounds per inch (lb./in.) or Newton per millimeter. The requirements and scale of load and deformation determine the stress of the spring. When a load is applied to the Compression Spring, the spring generates stress on the wound coil during the twisting process. The maximum stress on the surface of the steel wire; As the deformation of the spring changes, the load also changes, which leads to the emergence of operational stress planning.

How the axial force generated by the irregular spring is transferred to adjacent parts. Although opening is more suitable in some environments, the straightness provided by the closed mouth is greater.

Irregular spring

Irregular Springs are particularly suitable for:

1. Indicate the working environment for using heavy-duty springs

2. The load or stiffness tolerance of the demand is approaching abnormally

3. The height of compression is the minimum value

4. Introduction from the manufacturer of irregular springs, requiring thorough sealing and the same pressure on the supporting surface

5. It is necessary to reduce the possibility of twists and turns.