How to choose suitable spring shock absorbers

spring shock absorber products are widely used in various pipelines and equipment for professions such as steel, power generation, petrochemicals, cement steel, and urban heating. When selecting spring shock absorbers and other products, it is also important to be very cautious. Jiufukai will tell you a few ways to choose suitable spring shock absorbers:

1. The surface treatment of the shell and spring should be carried out through methods such as baking paint, galvanizing, zinc aluminum treatment, etc. to prevent rusting inside the square steel spring of the isolator in a short period of time, which will affect the service life of the damper. It is best not to use products with spray painted surface treatment.

2. The operating frequency of the equipment should be greater than 3 times the natural frequency of the spring damper. How can we ensure that the isolation power is above 85% in this situation. When the deflection of our Stainless Steel Spring shock absorber is 25MM, its natural frequency is 3-4HZ.

3. The horizontal stiffness and straight stiffness of the spring should be greater than or equal to 1 friction spring, and the ratio between the spring diameter and the height of the spring after additional negative pressure should be greater than 0.7. To ensure the stability of the Hardware Spring shock absorber in the horizontal direction

4. The principle of using suitable spring shock absorbers for the convenience device of the root drama.